Rule library
WarningField 2.060N/A
UAD1221 — Provide the date the property inspection was performed.
Where this rule lives in the report
Assignment Information
Property Data Report - Inspection Date
Contact Information
Report Section and Report Subsection as the GSEs define them — the black tab and grey bar you already read on the URAR.
- Severity
- Warning — flagged but does not block delivery. Reviewers will still look.
- Triggered when
PropertyDataReportIndicator = "true" and InspectionDate is not provided in SERVICE container with ServiceType = "Inspection"- Data Point Name
InspectionDate- Unique ID
1000.0119- Report Field ID
2.060- What this field means
- The date the inspection of the property was performed.
How to fix UAD1221
UAD1221 is a UAD 3.6 Warning edit; it may not block delivery, but it is still worth resolving before review.
- 01Open the Assignment Information › Contact Information › Property Data Report - Inspection Date area of the URAR and find Property Data Report - Inspection Date.
- 02Check the condition that triggers UAD1221: PropertyDataReportIndicator = "true" and InspectionDate is not provided in SERVICE container with ServiceType = "Inspection".
- 03Review and correct the value when appropriate; this is a Warning, but it can still raise reviewer questions.
- 04Use the official Single-family (SF1) sample value on this page as a reference pattern, then re-run validation.
This fix guidance is derived from the published rule message, trigger logic, report location, field definition, and official sample data available for this rule.
Seen in the sample reports
How this field is populated in the official UAD 3.6 sample scenarios.
2019-09-20Subject2019-08-07Subject