Rule library
WarningSales Comparable #n

UAD1758 — Only one line-item adjustment is allowed for this Adjustment Type.

Where this rule lives in the report

Does Not Display
Does Not Display (Comparable Adjustment Type (%PV%))
Does Not Display

Report Section and Report Subsection as the GSEs define them — the black tab and grey bar you already read on the URAR.

Severity
Warning — flagged but does not block delivery. Reviewers will still look.
Triggered when
@ValuationUseType = "SalesComparable" and there is more than one instance of COMPARABLE_ADJUSTMENT with the same ComparableAdjustmentType enumeration that should only be adjusted once (e.g., View). Please refer to the Adjustments Cardinality tab for the list of adjustments that can be applied only once.
Data Point Name
ComparableAdjustmentType (%PV%)
Unique ID
1800.0318
What this field means
A value from a MISMO prescribed list that specifies the type of adjustment made for comparison purposes within the Sales Comparison Approach.

How to fix UAD1758

UAD1758 is a UAD 3.6 Warning edit; it may not block delivery, but it is still worth resolving before review.

  1. 01Open the Does Not Display › Does Not Display › Does Not Display (Comparable Adjustment Type (%PV%)) area of the URAR and find Does Not Display (Comparable Adjustment Type ).
  2. 02Check the condition that triggers UAD1758: @ValuationUseType = "SalesComparable" and there is more than one instance of COMPARABLE_ADJUSTMENT with the same ComparableAdjustmentType enumeration that should only be adjusted once (e.g., View). Please refer to the Adjustments Cardinality tab for the list of adjustments that can be applied only once..
  3. 03Review and correct the value when appropriate; this is a Warning, but it can still raise reviewer questions.
  4. 04Use the official Single-family (SF1) sample value on this page as a reference pattern, then re-run validation.

This fix guidance is derived from the published rule message, trigger logic, report location, field definition, and official sample data available for this rule.

Seen in the sample reports

How this field is populated in the official UAD 3.6 sample scenarios.

SalesComparableAdditionalAdjustableComparisonItemSubject
Single-family (SF1)
ContractDateSales comp
Single-family (SF2)

More rules in “Does Not Display › Does Not Display”

UAD1738Provide the file name and location of the image within the .zip file (e.g., \\Images\MH1_Bedroom1.png). For assistance with this message, contact the appraisal software vendor.
Fatal
UAD1739Provide the file name and location of the image within the .zip file (e.g., \\Images\MH1_Deck.png). For assistance with this message, contact the appraisal software vendor.
Fatal
UAD1740Provide the file name and location of the image within the .zip file (e.g., \\Images\MH1_ExteriorTrimDDD.png). For assistance with this message, contact the appraisal software vendor.
Fatal
UAD1742The latitude must be a value between -90 and 90 with at least 5 digits of precision to the right of the decimal point. For assistance with this message, contact the appraisal software vendor.
Warning
UAD1743The longitude must be a value between -180 and 180 with at least 5 digits of precision to the right of the decimal point. For assistance with this message, contact the appraisal software vendor.
Warning
UAD1748The latitude must be a value between -90 and 90 with at least 5 digits of precision to the right of the decimal point. For assistance with this message, contact the appraisal software vendor.
Warning
UAD1749The longitude must be a value between -180 and 180 with at least 5 digits of precision to the right of the decimal point. For assistance with this message, contact the appraisal software vendor.
Warning
UAD1750Indicate whether a reconsideration of value has been requested.
Fatal