Rule library
FatalField 7.001N/A
UAD1677 — Provide the 'Measurement Standard' (i.e., ANSI, AMS) used for the appraisal.
Where this rule lives in the report
Sketch
Measurement Standard
Report Section as the GSEs define them — the black tab and grey bar you already read on the URAR.
- Severity
- Fatal — this blocks your UCDP submission and must be fixed before delivery.
- Triggered when
SketchExistsIndicator = "true" and MeasurementStandardPublisherType is not provided- Data Point Name
MeasurementStandardPublisherType- Unique ID
3300.0007- Report Field ID
7.001- What this field means
- A value from a MISMO prescribed list that represents the publisher of the property area measurement standard used for the appraisal.
How to fix UAD1677
UAD1677 is a Fatal UAD 3.6 edit, so clear it before the appraisal report goes to UCDP.
- 01Open the Sketch › Measurement Standard area of the URAR and find Measurement Standard.
- 02Check the condition that triggers UAD1677: SketchExistsIndicator = "true" and MeasurementStandardPublisherType is not provided.
- 03Correct the missing, invalid, duplicate, or inconsistent value before submitting to UCDP.
- 04Use the official Single-family (SF1) sample value on this page as a reference pattern, then re-run validation.
This fix guidance is derived from the published rule message, trigger logic, report location, field definition, and official sample data available for this rule.
Seen in the sample reports
How this field is populated in the official UAD 3.6 sample scenarios.
AmericanNationalStandardsInstituteAmericanNationalStandardsInstitute