Rule library
FatalSubject
UAD1557 — The 'Inspection Date' must be on or before the 'Effective Date of Appraisal'.
Where this rule lives in the report
Assignment Information
Inspection Date (%PV%)
Contact Information
Report Section and Report Subsection as the GSEs define them — the black tab and grey bar you already read on the URAR.
- Severity
- Fatal — this blocks your UCDP submission and must be fixed before delivery.
- Triggered when
InspectionDate > AppraisalReportEffectiveDate- Data Point Name
InspectionDate (%PV%)- Unique ID
2400.0080; 2400.0502
How to fix UAD1557
UAD1557 is a Fatal UAD 3.6 edit, so clear it before the appraisal report goes to UCDP.
- 01Open the Assignment Information › Contact Information › Inspection Date (%PV%) area of the URAR and find Inspection Date.
- 02Check the condition that triggers UAD1557: InspectionDate > AppraisalReportEffectiveDate.
- 03Correct the missing, invalid, duplicate, or inconsistent value before submitting to UCDP.
- 04Use the official Single-family (SF1) sample value on this page as a reference pattern, then re-run validation.
This fix guidance is derived from the published rule message, trigger logic, report location, field definition, and official sample data available for this rule.
Seen in the sample reports
How this field is populated in the official UAD 3.6 sample scenarios.
2019-09-20Subject2019-08-07Subject