Rule library
FatalField 2.058N/A
UAD1521 — Provide the manner in which the Property Data Collector conducted the exterior inspection.
Where this rule lives in the report
Assignment Information
Exterior
Report Section as the GSEs define them — the black tab and grey bar you already read on the URAR.
- Severity
- Fatal — this blocks your UCDP submission and must be fixed before delivery.
- Triggered when
PropertyDataReportIndicator = "true" and PropertyExteriorInspectionMethodType is not provided in SERVICE container with ServiceType = "Inspection"- Data Point Name
PropertyExteriorInspectionMethodType- Unique ID
1000.0132- Report Field ID
2.058- What this field means
- A value from a MISMO prescribed list that represents the method by which the exterior inspection was conducted.
How to fix UAD1521
UAD1521 is a Fatal UAD 3.6 edit, so clear it before the appraisal report goes to UCDP.
- 01Open the Assignment Information › Exterior area of the URAR and find Exterior.
- 02Check the condition that triggers UAD1521: PropertyDataReportIndicator = "true" and PropertyExteriorInspectionMethodType is not provided in SERVICE container with ServiceType = "Inspection".
- 03Correct the missing, invalid, duplicate, or inconsistent value before submitting to UCDP.
- 04Use the official Single-family (SF1) sample value on this page as a reference pattern, then re-run validation.
This fix guidance is derived from the published rule message, trigger logic, report location, field definition, and official sample data available for this rule.
Seen in the sample reports
How this field is populated in the official UAD 3.6 sample scenarios.
PhysicalSubjectPhysicalSubject