Rule library
FatalField 23.03.35Rental Comparable #n
UAD1499 — Provide the number of bedrooms in the living unit, even if the value is 0.
Where this rule lives in the report
Rental Information
Bedrooms
Comparable Rental Analysis
Report Section and Report Subsection as the GSEs define them — the black tab and grey bar you already read on the URAR.
- Severity
- Fatal — this blocks your UCDP submission and must be fixed before delivery.
- Triggered when
@ValuationUseType = "RentalComparable" and BedroomCount is not provided in PROPERTY_UNIT_DETAIL- Data Point Name
BedroomCount- Unique ID
2000.0101- Report Field ID
23.03.35- What this field means
- The number of bedrooms per unit.
How to fix UAD1499
UAD1499 is a Fatal UAD 3.6 edit, so clear it before the appraisal report goes to UCDP.
- 01Open the Rental Information › Comparable Rental Analysis › Bedrooms area of the URAR and find Bedrooms.
- 02Check the condition that triggers UAD1499: @ValuationUseType = "RentalComparable" and BedroomCount is not provided in PROPERTY_UNIT_DETAIL.
- 03Correct the missing, invalid, duplicate, or inconsistent value before submitting to UCDP.
- 04Use the official Single-family (SF1) sample value on this page as a reference pattern, then re-run validation.
This fix guidance is derived from the published rule message, trigger logic, report location, field definition, and official sample data available for this rule.
Seen in the sample reports
How this field is populated in the official UAD 3.6 sample scenarios.
5Subject5Subject