Rule library
FatalField 22.07.36Sales Comparable #n

UAD1483Provide the 'Finished Below Grade' Area, even if the value is 0.

Where this rule lives in the report

Sales Comparison Approach
Finished Area Below Grade
Unit(s)

Report Section and Report Subsection as the GSEs define them — the black tab and grey bar you already read on the URAR.

Severity
Fatal — this blocks your UCDP submission and must be fixed before delivery.
Triggered when
@ValuationUseType = "SalesComparable" and (ImprovementType = "Dwelling" or (ImprovementType = "Outbuilding" and OutbuildingRealPropertyIndicator = "true" and AccessoryDwellingUnitIndicator = "true")), and UnitStandardBelowGradeFinishedAreaMeasure is not provided in a given instance of PROPERTY_UNIT_AREA
Data Point Name
UnitStandardBelowGradeFinishedAreaMeasure
Unique ID
1800.0393
Report Field ID
22.07.36
What this field means
A measurement that specifies the total finished area below grade considered to be living area per the applicable standard and/or policy. The applicable unit of measurement is specified by the Area Unit Of Measure Type.

How to fix UAD1483

UAD1483 is a Fatal UAD 3.6 edit, so clear it before the appraisal report goes to UCDP.

  1. 01Open the Sales Comparison Approach › Unit(s) › Finished Area Below Grade area of the URAR and find Finished Area Below Grade.
  2. 02Check the condition that triggers UAD1483: @ValuationUseType = "SalesComparable" and (ImprovementType = "Dwelling" or (ImprovementType = "Outbuilding" and OutbuildingRealPropertyIndicator = "true" and AccessoryDwellingUnitIndicator = "true")), and UnitStandardBelowGradeFinishedAreaMeasure is not provided in a given instance of PROPERTY_UNIT_AREA.
  3. 03Correct the missing, invalid, duplicate, or inconsistent value before submitting to UCDP.
  4. 04Use the official Single-family (SF1) sample value on this page as a reference pattern, then re-run validation.

This fix guidance is derived from the published rule message, trigger logic, report location, field definition, and official sample data available for this rule.

Seen in the sample reports

How this field is populated in the official UAD 3.6 sample scenarios.

More rules in “Sales Comparison Approach › Unit(s)”