Rule library
FatalField 10.024Subject
UAD1175 — Provide the number of full bathrooms in the living unit, even if the value is 0.
Where this rule lives in the report
Unit Interior
Total Bathrooms - Full
Report Section as the GSEs define them — the black tab and grey bar you already read on the URAR.
- Severity
- Fatal — this blocks your UCDP submission and must be fixed before delivery.
- Triggered when
(ImprovementType = "Dwelling" or (ImprovementType = "Outbuilding" and OutbuildingRealPropertyIndicator = "true" and AccessoryDwellingUnitIndicator = "true")), and FullBathroomCount is not provided in a given instance of PROPERTY_UNIT_DETAIL- Data Point Name
FullBathroomCount- Unique ID
0700.0119- Report Field ID
10.024- What this field means
- The number of full bathrooms in the living unit.
How to fix UAD1175
UAD1175 is a Fatal UAD 3.6 edit, so clear it before the appraisal report goes to UCDP.
- 01Open the Unit Interior › Total Bathrooms - Full area of the URAR and find Total Bathrooms - Full.
- 02Check the condition that triggers UAD1175: (ImprovementType = "Dwelling" or (ImprovementType = "Outbuilding" and OutbuildingRealPropertyIndicator = "true" and AccessoryDwellingUnitIndicator = "true")), and FullBathroomCount is not provided in a given instance of PROPERTY_UNIT_DETAIL.
- 03Correct the missing, invalid, duplicate, or inconsistent value before submitting to UCDP.
- 04Use the official Single-family (SF1) sample value on this page as a reference pattern, then re-run validation.
This fix guidance is derived from the published rule message, trigger logic, report location, field definition, and official sample data available for this rule.
Seen in the sample reports
How this field is populated in the official UAD 3.6 sample scenarios.
3Subject4Subject