Rule library
WarningField 9.014Subject
UAD1119 — Provide the 'HUD Thermal Zone'.
Where this rule lives in the report
Manufactured Home
HUD Thermal Zone
HUD Data Plate
Report Section and Report Subsection as the GSEs define them — the black tab and grey bar you already read on the URAR.
- Severity
- Warning — flagged but does not block delivery. Reviewers will still look.
- Triggered when
ImprovementType = "Dwelling" and ConstructionMethod = "Manufactured" and ManufacturedHomeHUDDataPlateAttachedIndicator = "true", and ThermalZoneCode is not provided- Data Point Name
ThermalZoneCode- Unique ID
0500.0031- Report Field ID
9.014- What this field means
- An enumeration or a coded value identifying the Thermal Zone that the manufactured home was designed and constructed to conform to.
How to fix UAD1119
UAD1119 is a UAD 3.6 Warning edit; it may not block delivery, but it is still worth resolving before review.
- 01Open the Manufactured Home › HUD Data Plate › HUD Thermal Zone area of the URAR and find HUD Thermal Zone.
- 02Check the condition that triggers UAD1119: ImprovementType = "Dwelling" and ConstructionMethod = "Manufactured" and ManufacturedHomeHUDDataPlateAttachedIndicator = "true", and ThermalZoneCode is not provided.
- 03Review and correct the value when appropriate; this is a Warning, but it can still raise reviewer questions.
- 04Use the official Manufactured home (MH1) sample value on this page as a reference pattern, then re-run validation.
This fix guidance is derived from the published rule message, trigger logic, report location, field definition, and official sample data available for this rule.
Seen in the sample reports
How this field is populated in the official UAD 3.6 sample scenarios.
Zone3SubjectZone1Subject