Rule library
FatalField 9.011Subject
UAD1110 — Provide the date the manufactured home was built as noted on the HUD data plate.
Where this rule lives in the report
Manufactured Home
Date of Manufacture
HUD Data Plate
Report Section and Report Subsection as the GSEs define them — the black tab and grey bar you already read on the URAR.
- Severity
- Fatal — this blocks your UCDP submission and must be fixed before delivery.
- Triggered when
ImprovementType = "Dwelling" and ConstructionMethod = "Manufactured" and ManufacturedHomeHUDDataPlateAttachedIndicator = "true", and ManufacturedHomeManufactureDate is not provided- Data Point Name
ManufacturedHomeManufactureDate- Unique ID
0500.0016- Report Field ID
9.011- What this field means
- The date the manufactured home was built as noted on the HUD data plate.
How to fix UAD1110
UAD1110 is a Fatal UAD 3.6 edit, so clear it before the appraisal report goes to UCDP.
- 01Open the Manufactured Home › HUD Data Plate › Date of Manufacture area of the URAR and find Date of Manufacture.
- 02Check the condition that triggers UAD1110: ImprovementType = "Dwelling" and ConstructionMethod = "Manufactured" and ManufacturedHomeHUDDataPlateAttachedIndicator = "true", and ManufacturedHomeManufactureDate is not provided.
- 03Correct the missing, invalid, duplicate, or inconsistent value before submitting to UCDP.
- 04Use the official Manufactured home (MH1) sample value on this page as a reference pattern, then re-run validation.
This fix guidance is derived from the published rule message, trigger logic, report location, field definition, and official sample data available for this rule.
Seen in the sample reports
How this field is populated in the official UAD 3.6 sample scenarios.
2019-01-15Subject2020-09-01Subject