Rule library
FatalField 1.013Subject
UAD1012 — Provide the 'Attachment Type' for the property.
Where this rule lives in the report
Subject Property
Attachment Type
Report Section as the GSEs define them — the black tab and grey bar you already read on the URAR.
- Severity
- Fatal — this blocks your UCDP submission and must be fixed before delivery.
- Triggered when
AttachmentType is not provided- Data Point Name
AttachmentType- Unique ID
0100.0020- Report Field ID
1.013- What this field means
- A value from a MISMO prescribed list that specifies the type of physical attachment, if any, between the dwelling and adjacent dwellings.
How to fix UAD1012
UAD1012 is a Fatal UAD 3.6 edit, so clear it before the appraisal report goes to UCDP.
- 01Open the Subject Property › Attachment Type area of the URAR and find Attachment Type.
- 02Check the condition that triggers UAD1012: AttachmentType is not provided.
- 03Correct the missing, invalid, duplicate, or inconsistent value before submitting to UCDP.
- 04Use the official Single-family (SF1) sample value on this page as a reference pattern, then re-run validation.
This fix guidance is derived from the published rule message, trigger logic, report location, field definition, and official sample data available for this rule.
Seen in the sample reports
How this field is populated in the official UAD 3.6 sample scenarios.
DetachedSubjectAttachedSubject