Rule library
FatalField 22.05.37Sales Comparable #n
UAD1775 — Provide the 'Manufactured Home Width' (i.e., Single Wide, Multi Wide) for the sales comparable.
Where this rule lives in the report
Sales Comparison Approach
Manufactured Home Width
Dwelling(s)
Report Section and Report Subsection as the GSEs define them — the black tab and grey bar you already read on the URAR.
- Severity
- Fatal — this blocks your UCDP submission and must be fixed before delivery.
- Triggered when
@ValuationUseType = "SalesComparable" and ImprovementType = "Dwelling" and ConstructionMethodType = "Manufactured" and ManufacturedHomeWidthType is not provided- Data Point Name
ManufacturedHomeWidthType- Unique ID
1800.0379- Report Field ID
22.05.37- What this field means
- Specifies the common size (width) designation of a Manufactured home.
How to fix UAD1775
UAD1775 is a Fatal UAD 3.6 edit, so clear it before the appraisal report goes to UCDP.
- 01Open the Sales Comparison Approach › Dwelling(s) › Manufactured Home Width area of the URAR and find Manufactured Home Width.
- 02Check the condition that triggers UAD1775: @ValuationUseType = "SalesComparable" and ImprovementType = "Dwelling" and ConstructionMethodType = "Manufactured" and ManufacturedHomeWidthType is not provided.
- 03Correct the missing, invalid, duplicate, or inconsistent value before submitting to UCDP.
- 04Use the official Manufactured home (MH1) sample value on this page as a reference pattern, then re-run validation.
This fix guidance is derived from the published rule message, trigger logic, report location, field definition, and official sample data available for this rule.
Seen in the sample reports
How this field is populated in the official UAD 3.6 sample scenarios.
MultiWideSubjectMultiWideSubject