Rule library
FatalField 9.005Subject
UAD1126 — Provide the 'Manufactured Home Width' (i.e., Single Wide, Multi Wide).
Where this rule lives in the report
Manufactured Home
Manufactured Home Width
Report Section as the GSEs define them — the black tab and grey bar you already read on the URAR.
- Severity
- Fatal — this blocks your UCDP submission and must be fixed before delivery.
- Triggered when
ImprovementType = "Dwelling" and ConstructionMethodType = "Manufactured" and ManufacturedHomeWidthType is not provided- Data Point Name
ManufacturedHomeWidthType- Unique ID
0500.0044- Report Field ID
9.005- What this field means
- Specifies the common size (width) designation of a Manufactured home.
How to fix UAD1126
UAD1126 is a Fatal UAD 3.6 edit, so clear it before the appraisal report goes to UCDP.
- 01Open the Manufactured Home › Manufactured Home Width area of the URAR and find Manufactured Home Width.
- 02Check the condition that triggers UAD1126: ImprovementType = "Dwelling" and ConstructionMethodType = "Manufactured" and ManufacturedHomeWidthType is not provided.
- 03Correct the missing, invalid, duplicate, or inconsistent value before submitting to UCDP.
- 04Use the official Manufactured home (MH1) sample value on this page as a reference pattern, then re-run validation.
This fix guidance is derived from the published rule message, trigger logic, report location, field definition, and official sample data available for this rule.
Seen in the sample reports
How this field is populated in the official UAD 3.6 sample scenarios.
MultiWideSubjectMultiWideSubject