Rule library
FatalField 1.014Subject
UAD1060 — Provide 'Structure Design' (e.g., Low-rise, Mid-rise, High-rise, Rowhouse / Townhouse, Semi-Detached) for each dwelling.
Where this rule lives in the report
Dwelling Exterior
Structure Design
Report Section as the GSEs define them — the black tab and grey bar you already read on the URAR.
- Severity
- Fatal — this blocks your UCDP submission and must be fixed before delivery.
- Triggered when
ImprovementType = "Dwelling" and AttachmentType = "Attached", and StructuralDesignType is not provided in ARCHITECTURAL_DESIGN in a given instance of IMPROVEMENT- Data Point Name
StructuralDesignType- Unique ID
0300.0032- Report Field ID
1.014- What this field means
- A value from a MISMO prescribed list that represents the type of structural design when dwellings are connected (e.g. rowhouse, townhouse).
How to fix UAD1060
UAD1060 is a Fatal UAD 3.6 edit, so clear it before the appraisal report goes to UCDP.
- 01Open the Dwelling Exterior › Structure Design area of the URAR and find Structure Design.
- 02Check the condition that triggers UAD1060: ImprovementType = "Dwelling" and AttachmentType = "Attached", and StructuralDesignType is not provided in ARCHITECTURAL_DESIGN in a given instance of IMPROVEMENT.
- 03Correct the missing, invalid, duplicate, or inconsistent value before submitting to UCDP.
- 04Use the official Single-family (SF2) sample value on this page as a reference pattern, then re-run validation.
This fix guidance is derived from the published rule message, trigger logic, report location, field definition, and official sample data available for this rule.
Seen in the sample reports
How this field is populated in the official UAD 3.6 sample scenarios.
RowhouseTownhouseSubjectMidriseSubject